BlieSMa T34A – 4 Aluminium-Magnesium Dome Tweeter (Pair)

£421.54 UK VAT added in cart

The Bliesma T34A-$ is an exceptional Aluminium-Magnesium tweeter. It really is a game changer for tweeters, with it’s 34mm dome, 3mm excursion, wide dispersion and extremely linear frequency response it’s an easy to use driver that can be used safely down to around 1.3kHz. That makes it a driver without parallel. This driver opens up the possibilities to use higher efficiency more dynamic 8 inch woofers in partnership instead of the usual 6+1 and designs will follow on these pages for you to build. Even though the driver has great lower frequency  response it still has an exceptional high frequency response too, better than a lot of smaller tweeters, linear out past 25 kHz with the first break up mode out to 30 kHz.

Scroll down for full description

Out of stock

Description

The Bliesma T34A-$ is an exceptional Aluminium-Magnesium tweeter. It really is a game changer for tweeters, with it’s 34mm dome, 3mm excursion, wide dispersion and extremely linear frequency response it’s an easy to use driver that can be used safely down to around 1.3kHz. That makes it a driver without parallel. This driver opens up the possibilities to use higher efficiency more dynamic 8 inch woofers in partnership instead of the usual 6+1 and designs will follow on these pages for you to build. Even though the driver has great lower frequency  response it still has an exceptional high frequency response too, better than a lot of smaller tweeters, linear out past 25 kHz with the first break up mode out to 30 kHz

Datasheet download

There are loads of really good reviews out there for this driver that can be read here.

Some of those pages have some preliminary designs for these drivers and course we can help you build any of those designs, just drop us a line.

Features

  • 34 mm aluminium-magnesium alloy dome with variable thickness for 27 kHz first breakup mode
  • Extremely low moving mass for better transient response and higher efficiency
  • Fully saturated neodymium motor with copper sleeve for low non linear and modulation distortion
  • 3 mm linear excursion (P-P) and large vent channel for undistorted low frequency operation
  • Narrow surround for less “soft dome” coloration
  • Flush mounted surround and rear mounted magnet system for flat frequency response and wide off-axis response
  • No ferrofluid for improved dynamics
  • Underhung voice coil wound on titanium former
  • Flexible and lightweight lead wires made in Denmark
  • Thick aluminium powder coated flange
  • Aluminium rear chamber with natural wool damping
  • Extremely wide recommended frequency range 1.3 kHz-35 kHz

 

PRODUCT SPECIFICATIONS

Tweeter Type Corundum Dome
Cone / Dome Diameter 1-1/4″
Impedance 4 ohms
Power Handling (RMS) 80 Watts
Frequency Response 1,300 to 30,000 Hz
Sensitivity 96 dB 1W/1m

 

THIELE-SMALL PARAMETERS

Resonant Frequency (Fs) 790 Hz
DC Resistance (Re) 3.3  ohms
Voice Coil Inductance (Le) 0.008 mH
Mechanical Q (Qms) 2.1
Electromagnetic Q (Qes) 0.42
Total Q (Qts) 0.35
Maximum lineair excursion (Xmax) 1,5 mm
Surface Area of Cone (Sd) 10.5 cm2
Diaphragm Mass Inc. Airload (Mms) 0.28g

Additional information

Weight 2.5 kg
Dimensions 39 × 25 × 13 cm
BL

3.5 TM

FS

790 hz

LE

8 uH

QES

0.42

QMS

2.1

QTS

0.35

RE

3.3 Ohm

SD

10 cm2, 10.5 cm2

SPL

96 dB

POWER (NOMINAL)

80 Watts

Cone Diameter

34 mm

cone material

Magnesium – aluminium

Voice coil diameter

34 mm

Linear excursion

3mm peak to peak

Reviews

There are no reviews yet.

Be the first to review “BlieSMa T34A – 4 Aluminium-Magnesium Dome Tweeter (Pair)”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.