Description
The Arylic Up2Stream Pro V3 is a WiFi, Ethernet, USB and Bluetooth 5.0 enabled wireless audio receiver/pre-amp module, that can be used at the heart for your DIY streamer project. Despite only being the size of a credit card, this DIY streaming PCB has a large array of connectivity and features. It can be controlled through the free 4STREAM app, which is available through the Apple App Store for iOS devices and through Google Play for Android devices.
The following internet streaming services are supported by the Up2Stream Pro V3:
- Spotify
- TIDAL
- Napster
- Qobuz
- Deezer
- QQ Music
- TuneIn
- iHeartRadio
- XIMALYA
The Arylic Up2Stream Pro V3 supports the following streaming protocols:
- AirPlay
- DLNA/UPnP
- Spotify Connect
- Qplay
Consequently, streaming to the Arylic Up2Stream Pro V3 from laptops and PCs is possible through iTunes. Streaming from Windows laptops and PCs is also possible using foobar2000.
Music can also be streamed from NAS devices and from USB sticks via the USB type A connector.
As well as connecting to a LAN using Wi-Fi, the board can be connected to the network using the Ethernet port.
Multi-room support is available when using more than one Arylic device with the 4STREAM app. True Wireless Stereo (TWS) is also supported, allowing devices to designated as left/right channel only in addition to stereo.
The Arylic Up2Stream Pro V3 can also be used as a USB DAC for a PC or laptop via the micro USB connector.
Further connectivity is provided by line in analog 3.5mm input and output jacks, and 4 pin input and output sockets. Digital I2S and SPDIF outputs to connect to an external digital amp are provided by a 7 pin socket on the board. For the I2S output, BCLK is 2.8MHz, the LRCK is 44.1KHz and the MCLK is 11.288MHz. The 16 bit I2S output uses the standard I2S data format.
The Arylic Up2Stream Pro V3 requires a 5V-1A power supply using either the micro USB port or the 2 pin power connector. A power supply is not included.
The 4 pin GPIO socket can be used to enable external volume control. The 10 pin Extension socket can be used to enable external buttons and LEDs.
The Arylic Up2Stream Pro V3 comes with an internal Wi-Fi antenna, 4 and 7 pin cables with connectors at both ends, a 2 pin cable, and a user manual. A clear perspex case, an IR remote control, an internal antenna for Bluetooth and external antennas for Wi-Fi and/or Bluetooth are available separately for the Arylic Up2Stream Pro V3.
If you don’t require all the options provided by the Arylic Up2Stream Pro V3, take a look at its smaller sibling, the Arylic Up2Stream Mini V3.
You can find loads of info on board set-up, software set-up and various projects for all Arylic products over on their YouTube channel, it’s a real gold mine of info.
Reviews
There are no reviews yet.